設備展示
功能與特點：
★主機、風機、相位電機等各部均采用變頻器控制，調速平穩、省電、準確、可靠。
★整機自動歸零系統，儲存常用訂單，快速換單，操作便捷。
★主要傳動軸承日本NSK,其他軸承品牌為國產HRB,確保傳動穩定性。
★機械式自動上油潤滑系統，配備自動平衡裝置，增強傳動齒輪的使用壽命。
Function and characteristic:
paper board and bendcardboard transmission stability, high speed and precision.
the national level 6precision, use for a long time,high overprinting accuracy.
★前緣送紙系統，真空吸附傳送，適用于各種瓦型紙板，增加薄紙板及曲翹紙板傳送穩定，高速、精準。
★高精度齒輪傳動，精準耐用:2OCrMnTi高頻淬火，硬度HRC58-62,達國家6級精度,長期使用，套印精度高。
★L(fēng)ead edge feeding system, vacuum adsorption transmission, suitable for all kinds of corrugated cardboard,Increase tissue
★Main motor、fan motor、phase motor controlled by inverter,adjust speed smooth, save electricity, accurate and reliable.
★High precision gear transmission, accurate and durable:20CiMnTi high-frequency quenching ,hardness HRC58-62, up to
★Total machine automatic reset zero system, storing common order, change order quickly, operation is convenient.
★Main drive bearing Japan NSK, other bearing brands for domestic HRB, ensure the transmission stability.
★Mechanical automatic up oil lubrication system, equipped with automatic balancing device, increase the service lie of gear.
項目 | Project | 92o | 1224 | 1426 | 1628 | ||||
最高機械速度（張/分鐘） | Max speed ( pcs/min ) | 3oo | 250 | 180 | 160 | ||||
送紙精度( mm) | Feeding precision (mm ) | ± | 1 | ||||||
最小送紙尺寸(mm ) | Min Sheet size ( mm ) | 300×600 | 420×600 | 450×600 | 450×600 | ||||
正常送紙最大尺寸(mm ) | Max sheet size ( mm ) | 860×2100 | 1150×2500 | 1350×2700 | 1500×2900 | ||||
隔張送紙尺寸(mm) | Skip Sheet size (mm ) | 1200×2100 | 1500×2500 | 1800×2700 | 2000 x2900 | ||||
最大印刷面積(mm) | Max printing area ( mm ) | 900 ×2000 | 1200×2400 | 1400 ×2600 | 1600×2800 | ||||
印刷精度（mm) | Printing precision (mm ) | ±0.5 | |||||||
印版厚度(mm) | Plate thickness (mm ) | 7.2 | |||||||
最小開槽間隔(mm ) Minimumslot dstanoe ( mm ) | 正刀positive knife (mm ) | 130×130×130×130 | 140×140×140×140 | 150×150×150×150 | |||||
反刀negative knife (mm ) | 230×65×230×65 | 230×70×230×70 | 240×75×240×75 | ||||||
最大開槽深度(mm ) | Max slot depth ( mm ) | 230 | 30o | 36o 40o | |||||
(可增加刀片，加大開槽深度) increase the blade,increase the slot depth | |||||||||
開槽精度（mm) | slotting precision ( mm ) | ±1 | |||||||
最大模切尺寸(mm ) | Max die cutting size (mm | 900x1950 | 1200×2400 | 1400×2600 | 1600×2800 | ||||
模切精度（mm) | Die cutting precision ( mm ) | ±1 | |||||||
 |
★真空吸附前緣送紙，變頻調控風量，增加紙板輸送穩定性、
準確性。
★快換式送紙膠棍機構，包裹軟橡膠，經久耐用，設備維護方便。
★雙排送紙膠輯傳送，提高送紙精度。
★吸風除塵系統，可大量清除紙板表面紙屑粉塵，提高印刷品質。
★左、右側擋板、后托板均為電腦操控，精密導向機構，位移平穩，
附帶側拍功能。
★選配伺服前緣、免壓送紙系統。
★The vacuum adsorption lead edge paper, frequency conversion control air volume, increase
the cardboard conveying stability and accuracy.
★Quick change type feeding rubber roller mechanism, wrap soft rubber,durable,machine
maintenance is convenient.
★Double row feeding roller transmission,improve the feed accuracy.
★Suction dust removal system, it can be remove a lot of dust surface of cardboard, improve the
quality of printing.
★L(fēng)eft and right side baffle and back support bafle are computer control, precision guidance
mechanism,displacement is smooth, with side pat function.
★Optional servo leading edge,No pressure feed system.
★配備進口快換式聚氨酯膠墊，更換方便，具有單向離合器
作線速度補償功能，可確保膠墊磨損前和磨損后模切出的
紙板完全一致。
★工作中模切氈套滾筒機械螺旋式左右自動橫移(±20mm),
使切口刀痕不重復，延長膠墊使用壽命。
★膠墊棍與模切棍間隙采用氣動控制，正常送紙時氈套棍下
降到工作位置，停止送紙時氈套輯自動升起。
★模切棍橫向電腦操控，電動調整，調幅±10mm。
★膠墊修正機構，增加膠墊使用次數，降低消耗。
★快移式送紙環，快速、方便。
★模切底部裝有廢紙輸送裝置，將模切后的紙屑輸送到設備
以外，方便清理。
★Equipped with imported quick change type polyurethane rubber,easy to change,with one.- way
clutch as linear velocity compensation function,Ensures the rubber wear before and wear after
die cut out the cardboard is same.
★In working the rubber roller Mechanical spiral automatic left and right transverse (±20mm), let the
incision mark not repeat,Prolong the service life of the rubber.
★Rubber gasket roller and die cutting roller distance adopts pneumatic control i, when normal
feeding paper rubber gasket roller down to the job position,stop feeding paper Rubber gasket
roller automatic rising.
★Die-cutting roller transverse move left and right computer control, electric adjustment,adjustment
range± 10mm.
★Rubber gasket correction mechanism, increase the rubber use number of times, reduce the
consumption.
★The fast moving type feeding paper ring,fast and convenient.
★Equipped with waste paper conveyer belt at the bottom of the die cutting unit,Transfer the die -
cut paper scraps outside of the equipment.convenient cleaning.
★印刷棍橫向電腦調整，調幅±10mm。
★精密網紋棍，其網紋棍配合送紙系統，氣壓式自動升降裝置
(送紙時網混下降與印版接觸，停止送紙時網棍上升與印版分離)。
★棘輪式快速掛版裝置，全版掛版溝，適用9mm掛版條，附腳踏開
關電動控制正反轉。
★快速更換膠棍、網棍裝置,配快換支架。
★擦版記憶、自動復位系統。
★快移式送紙環，快速、方便。
★選配刮刀及陶瓷網紋棍勻墨方式。
★選配傾斜校正裝置，貼版時的傾斜誤差可在版棍上快速糾正。
★Printing roller transverse move computer adjustment,,adjustment range ± 10mm.
★Precise anilox roller , the anilox roller cooperate feed system, pneumatic type automatic liting
device(when feeding paper the anilox roller decline connect with the printing plate,when stop
feeding paper anilox roller up separate with the printing plate ).
★Ratchet type quickly hang plate device, fully plate hang plat slot . suitable for 9 mm hang plate
article,with foot switch electric control positive and negative rotation.
★Quick replacement rubber roller, anilox roller , equipped with fast replacement bracket.
Clean plate memory，automatic reset system.
The fast moving type feeding paper ring, fast and convenient.
Optional doctor blade and ceramic anilox roll way of ink distribution.
★Optional tilt correction device,when paste plate the tilt error can be quickly corrected on printing
plate roller.
★紙板可堆疊高度1600mm。
★床臺升降由強力鏈條帶動。升降電機附剎車功能，以保持固定位置，不會下滑。
★床臺隨紙板堆高，自動升降。當紙板堆積到預定高度時，氣壓式抬紙機構自動打開，接住紙板，紙滿報警提示
★設有安全保護裝置，強制床臺不會突然下滑，確保作業人員安全。
★平面皺紋爬坡傳送帶，紙板不會滑坡。
The height of stack is 16o0mm.
machine tool can keep the fixed position to prevent failing down.
the paper receiving tray will automatically open and catch the paperboard while the paperboards are piled to the planned height.
*Setting the save protect device ,which was force the platform can not illing down abruptly , can make the worker safety.
The surface corrugated belt can prevent the sliding of the paperboard.
* The rise and descending of the machine tod patfom is drven by the powerul chain.The rise and descending motor has equipped the brake function,so the
motion,
★With the paperboardiling to the higher lever the machine tool platom automatially adjusts the ting height;The organizalion or lt the paper by pnaumalr
